Marshall Stability Test Machine 50Kn, Digimatic (E Version) 2010 X / 008

Description

Standard: ASTM D1559, D5581, AASTHO T245, EN 12697-34, BS 598:107

Marshall Stability Test Machine 50kN, Digimatic

Marshall Stability Test Machine is used to measure the resistance of asphalt mixtures to deformation under load which determines the design and evaluation of asphalt pavements. The test to determine Marshall Stability involves compacting a cylindrical sample of asphalt mixture and then subjecting it to a compressive load at a controlled rate and temperature. The maximum load sustained by the sample before failure, along with other parameters such as flow, deformation, and density, are used to assess the quality and suitability of the asphalt mix for its intended application in road construction.

Digimatic Marshall Stability Test Machineautomated the procedures of conducting Marshall Stability tests on asphalt samples. Instead of manual operation, where the process required human power to manually operate the machine and record the result from proving ring gauges. Automatic Marshall Stability eliminates all the manual procedures with just a basic setup and directly shows the result after the test is completed. This ensures greater accuracy, repeatability, and efficiency in conducting these tests.

The Digimatic Marshall Stability Test Machinecomes with a newly invented bench mounting type machine, with a rigid and compact design compared with the previous model. By using a DC motorized drive system to achieve more reliable and high-accuracy results.

Technical Specifications

Unit Consists Of:

*1 Copy of Manual Instruction

Optional Accessories

Standards

• ASTM D1559: This standard, titled “Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus,” outlines a procedure for determining the resistance of bituminous mixtures to plastic deformation using the Marshall stability test.
• ASTM D5581: It provides a method for determining the resilient modulus of bituminous mixtures by subjecting cylindrical specimens to repeated indirect tension loading.
• AASHTO T245: This American Association of State Highway and Transportation Officials (AASHTO) standard is related to the determination of the resistance of asphalt mixtures to moisture-induced damage.
• EN 12697-34: This European standard is titled “Bituminous mixtures – Test methods for hot mix asphalt – Part 34: Marshall test.”
• BS 598:107: This British Standard (BS) pertains to the determination of the resistance of bituminous mixtures to plastic deformation using the Marshall stability test.

Test Procedure ofMotorizedMarshall Stability Compression Tester 50kN

1. Material Preparation:Create the asphalt mix in the laboratory. Mould the mix into cylindrical specimens using Marshall moulds.

2. Compaction:Use a Marshall hammer to compact the specimens (around 75 blows on each side). Ensure even compaction.

3. Curing:Let the compacted specimens cool and cure for about 24 hours.

4. Testing:Place the cured specimen in the Marshall stability test machine. Apply a load until the specimen breaks or reaches maximum load. Record the maximum load sustained (Marshall stability) and the corresponding deformation.

5. Data Analysis:Calculate the flow, which is the horizontal movement at maximum load. Note any other specified parameters

6. Quality Check:Compare results with design criteria and quality control limits. Ensure the asphalt mix meets the required standards.

7. Documentation:Document test details, including specimen information, testing conditions, and results.

Product Video

How to OperateDigimatic Marshall Stability Test Machine 50kN